Coriolis Flowmeter
Rheonik Coriolis Meter
All Rheonik Coriolis mass flow meters are manufactured to strictly controlled procedures and quality standards. The Rheonik range offers a wide variety of sizes, optimized to give accurate and reliable performance without compromise. The Omega tube Coriolis meter is one of the most versatile meters available on the market today.
Feature and Benefits:
- Very high accuracy
- Direct mass flow rate
- Liquid, sludge and gas measurement capability
- Models to measure flow rates from as low as 0.03 kg/h up to 1,500,000 kg/h (0.07 lb/h to 3,300,000 lb/h)
- Line sizes up to 12”/DN300
- Pressure ratings up to 900bar/13,050psig
- Temperature ratings from -200°C to 400°C / -328°F to +750°F
- Fiscal/custody transfer approvals (OIML R117/NTEP/MID (pending))
- ATEX and CSA hazardous area approvals covering most of the world
- Extreme resistance to gas bubbles entrained in the process stream
- Unaffected by viscosity, density or pressure changes
- Multifunction measurement capability includes density and temperature
Rheonik Coriolis Meter General Brochure
RHM 03 – Flexible Coriolis Mass Flowmeter for low flow measurements
RHM 04 – Universal Coriolis Mass Flowmeter with particular Fast Response
RHM 06 – Rheonik Mass Flowmeter
RHM 08 – Rheonik Mass Flowmeter
RHM 12 – Standard 1 inch Coriolis Mass Flowmeter
RHM 015 – Ultimate Low Flow Coriolis Mass Flowmeter
RHM 15 – Medium sized Coriolis Mass Flowmeter
RHM 20 – Medium sized Coriolis Mass Flowmeter
RHM 30 – Coriolis Mass Flowmeter for medium Flow Also Suited for High Pressure Applications
RHM 40 – Coriolis Mass Flowmeter for Medium Flow Rates
RHM 60 – Coriolis Mass Flowmeter for Medium Flow also Suited for High Pressure Applications
RHM 80 – Coriolis Mass Flowmeter for Large Flow Applications Optional Heavy Duty Version
RHM 100 – Coriolis Mass Flowmeter for High Flow Applications
RHM CNG – The Specialized Coriolis Mass Flowmeter for Compressed Natural Gas
coming soon
coming soon
coming soon
Rheonik Transmitters
A full range of Rheonik transmitters is available offering a comprehensive set of features for end users. Select a transmitter based upon application requirements. Rheonik Coriolis transmitters provide a variety of communication interfaces to DCS or PLC systems
- Multi variable transmitters that can output flow rate, density, temperature (model dependent)
- Typical outputs (model dependent):
- Analog current outputs (up to 2) for mass volumetric flow rate, temperature and density
- Totalizer
- Pulse/frequency output (can be phase shifted for custody transfer applications)
- Status outputs (up to 3)
- Serial output (RS232/RS422/RS485)
- Hart Batch controller
- Typical inputs (model dependent)
- Status input (up to 2) used to start/stop batch, reset totalizer, reset zero, accept errors
- Clear LCD Display
- Hazardous area approvals CSA and ATEX
- Fiscal/custody transfer approvals
OIML R117 NTEP(MID pending)