Ultrasonic Inspection

Veronics Instruments Inc. is proud to represent the U.E. Systems Line of Ultrasonic Inspection Kits

ONE INSTRUMENT TESTS THEM ALL:

Contact Applications includes:

Bearings / Gear Boxes / Line Blockage / Steam Traps / Valves / Compressors Motors / Pipes / Flow Direction / Underground Leaks

Airborne Applications including:

Vacuum Leaks / Welds / Substations / Heat Exchangers / Seals / Pumps Tanks Air Brakes / Gaskets / Pressure Leaks (all types) Electrical Arc (including CORONA) / Caulking (air infiltration) Wind Noise Problems / Junction Boxes

The World's Most Advanced Ultrasound Inspection System ULTRAPROBE® 10,000
Inspect · Record Sounds · Store Information · Manage Data

The Ultraprobe 10,000 (PDF 5MB) brings Ultrasound Inspection technology to a whole new level. With this one system inspectors can perform condition analysis, record sounds, store and manage data.

The Ultraprobe 9000 Kit Complete is a digital ultrasonic inspection, information storage and retrieval system

Fast accurate diagnosis through the ULTRAPROBE 2000 System will dramatically reduce unplanned down time and shorten planned outage time

Designed for ease of use, it often takes no more than 15 minutes to become competent in testing with the ULTRAPROBE 550 (PDF 2MB).

The Ultraprobe 100 (PDF 2MB) senses high frequency sounds produced by operating equipment, leaks and electrical discharges. It electronically translates these signals by heterodyning them down into the audible range so that a user can hear these sounds through a headset and see them as intensity increments on the meter.

UE Systems' Ultraprobe 201 Grease Caddy (PDF 2MB) is so sensitive you will hear when the grease enter the bearing and recognize when to stop applying your lubrication.

The Ultra-Trak 750 passively monitors ultrasounds produced by operating equipment. It can be readily connected to alarms or recorders for data logging, thanks to its 4-20 mA current output, coupled with a pure demodulated output.