Veronics Instruments Inc.
Home | Contact Us  
Products

 

 

Ultrasonic Flowmeters - Liquid


Veronics Instruments Inc. proudly represents GE Industrial Sensing's (Formerly Panametrics) Ultrasonic Flowmeters for Liquids.

GE Panametrics’ DF868 ultrasonic liquid flowmeter is a fixed-installation meter based on our award-winning TransPort PT868 portable ultrasonic liquid flowmeter. The DF868 is available with one or two channels. Using clamp-on flow transducers, the DF868 flowmeter measures flow rate through metal, plastic or even concrete-lined pipes without penetrating the pipe wall.

  • Pipes from ½ to 200 in (1.27 cm to 5.1 m)

  • Single-and dual-channel modes

  • Built-in 43,000-point datalogger

  • Two independent programmable graphic LCDs

  • Automatic tracking window for best accuracy when fluid conditions change

The ISX878 liquid flowmeter works on 1/2" to 16" pipes with clean fluids. It utilizes advanced clamp-on transducers to interrogate the flow using the GE's patented Correlation Transit-Time(TM) technology. The ISX878 is loop powered, operating on two wires with a maximum power usage of 700 mW. It is easy to program using the 6 button keypad and graphical display or a PC interface using PanaView. It is ATEX rated for use in hazardous locations with an intrinsically safe rating.

The XMT868i liquid flow transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter package that measures only 8.2 by 6.6 in (20.1 by 16.8 cm), weighs only 10 lb (4.5 kg) and can be installed right at the process measurement point. The all-digital XMT868i has no moving parts and provides long-term, drift-free operation. An on-board microprocessor provides exclusive digital signal coding and correlation detection routines, automatic adjustment to changing fluid properties, dynamically configured operating software to simplify programming and built-in energy flow measurement.

  • Flow range: -40 to 40 ft/s (-12.2 to 12.2 m/s)

  • Pipe sizes ½ to 200 in (1.27 cm to 5.1 m)

  • Single- and dual-channel modes

  • RTDs for energy flow measurements (optional)

  • Data logging capabilities (optional)

  • Weatherproof/explosion-proof housing

The TransPort PT878 Portable flowmeter packs big features into a compact, light package. Its built-in datalogger can store more than 100,000 data points and up to 32 sets of site location parameters. You can add an optional built-in ultrasonic thickness gage. Temperature transducers are available for measuring energy flow rate. The rechargeable battery provides six to eight hours of continuous remote operation. The unit has a built-in infrared port to transfer datalog, site and other files to your PC. A rugged, sealed enclosure provides IP67 submersibility to protect the PT878 if it should accidentally fall into water.

  • Noninvasive clamp-on or wetted transducers

  • Flow range 0.1 to 40 ft/s (0.03 to 12.2 m/s)

  • Velocity, volumetric, energy and totalized flow

  • Built-in datalogger for 100,000 measurements

  • Built-in ultrasonic pipe-thickness gage (optional)

  • RTDs for energy flow measurement (optional)

GE Panametrics’ AquaTrans AT868 ultrasonic flowmeter combines state-of-the-art flow measurement capability with a rugged, low-cost transmitter package that can be installed right at the process measurement point. It is designed specifically for municipal applications such as water, wastewater and sewage. Setup and service are easily accomplished by using the AT868 transmitter’s internal keypad or by connecting the AT868 to a laptop PC and using GE Panametrics instrument interface software. Available in single or two Channel Configuration.

  • Noninvasive clamp-on or wetted transducers

  • Flow range 0.1 to 40 ft/s (0.03 to 12.2 m/s)

  • Velocity, volumetric and totaled flow

  • One analog output and one frequency/pulse totalizer output standard

  • Internal keypad for field programming

  • Low-cost package

The GE Panametrics’ DigitalFlow UTX878 ultrasonic flowmeter brings the simplicity of loop-powered installation to clamp-on ultrasonic flow measurement in a low-cost package that remainsfull of features such as a large display and integral keypad. The UTX878 utilizes new transducer technology that allows the meter to operate with as low as 60mW of power, which makes the UTX878 the perfect fit for applications with minimal power requirements.

  • Loop-powered

  • Operates with as low as 60mW of power

  • Velocity, volumetric flow

  • 1/2" to 8" pipes

  • External keypad for field programming

  • Large Display

  • Low-cost

The GE Industrial Sensing PanaFlowTM Meter System wetted ultrasonic flowmeter product for liquids, gases or steam that uses standardized flowmeter body designs with options for one or two-path ultrasonic transducers, and local or remote flowmeter electronics. The PanaFlow Meter System is designed for applications such as natural gas, fuel gas, hydrocarbon liquids or gases, solvents, weak acids, water, and saturated or superheated steam.

  • High performance, low cost

  • Complete ‘Plug-and-Play’ system

  • Optional integral explosionproof / flameproof electronics, pre-wired to transducers

  • Bidirectional

  • No pressure drop

  • Suitable for a wide range of temperatures and pressures

  • 2 to 24 inch pipe size capability

  • Simple installation

  • Liquids, gases, or steam

Bundled Waveguide Transducer (BWT) System For Cryogenic LNG and other Extremely Low or High Temperature Ultrasonic Flowmeter Applications

The OKS clamp-on buffer transducer overcomes the problems of traditional clamp-on methods at very high or very low temperatures.

 Veronics Instruments Inc.