[bottom of graphic]

Ultrasonic Flowmeters – Gas

Veronics Instruments Inc. proudly represents Panametrics Ultrasonic Flowmeters for Gases.

GF868 flare gas flowmeter

The GF868 flare gas flowmeter improves the efficiency of petrochemical plants, refineries and offshore platforms. It uses a proprietary algorithm to determine instantaneously the molecular weight and mass flow rate of the flare gas. The meter is used to conserve energy and reduce product loss by identifying sources of leaks into the flare systems. It also helps improve compliance with pollution-control regulations and reduces energy usage by accurately controlling the amount of steam fed to the flare tip.

  • Bi-directional velocity range: 0.1 to 275 ft/s (0.03 to 85 m/s)
  • Velocity, mass and volumetric flow
  • Instantaneous gas molecular weight
  • Measurement independent of composition
  • No moving parts; nothing to clog or wear out
  • No regular maintenance required

Panametrics’ GC868 flowmeter

Panametrics’ GC868 flowmeter is a fixed-installation flowmeter comprised of the GC868 electronics, a pair of advanced clamp-on ultrasonic transducers, a clamping fixture, a preamplifier located near the transducers and coaxial cables to connect the transducers to the preamplifier and GC868 electronics. The DigitalFlow™ GC868 flowmeter can be used to measure the flow of any gas.

  • No wetted parts
  • One or two channels (paths)
  • No moving parts
  • Clamp-on; nonobstructive
  • No pressure drop
  • Simple installation
  • Temperatures up to 230 degrees C

Panametrics TransPort PT878GC

The GE Industrial Sensing TransPort PT878GC brings clamp-on ultrasonic gas flow metering capability to the portable level. Designed for natural gas pipeline, compressed air, inert gas or any compressed gas applications, the new PT878GC has the ability to measure gas flow rates, log data to internal memory and export flow data to a PC.

  • Noninvasive clamp-on transducers
  • Temperatures up to 230 degrees C
  • Velocity, volumetric, totalized actual and standard flow
  • 3/4 to 24 inch pipe size capability
  • Built-in datalogger for 100,000 measurements
  • Built-in ultrasonic pipe-thickness gage (optional)

Panametrics TransPort PT878GC

coming soon

coming soon

coming soon

Panametrics’ DigitalFlow™ CTF878

The Panametrics’ DigitalFlow™ CTF878 brings clamp-on ultrasonic gas flow metering capability to atmospheric pressure applications at velocities up to 150 ft/s (46m/s). The new CTF878 uses the correlation tag ultrasonic flow measurement technique to measure accurately and reliably the flow of natural gas, compressed air, inert gas or any other gases.

  • Noninvasive clamp-on transducers
  • No pressure drop
  • Temperatures up to 130 degrees C
  • Velocity, volumetric, totalized actual and standard flow
  • 6- to 30-inch pipe size capability
  • Simple installation

DigitalFlow™ GM868 general-purpose flowmeter and XGM868i low-cost, transmitter-based gas flowmeter

The DigitalFlow™ GM868 general-purpose flowmeter and XGM868i low-cost, transmitter-based gas flowmeter measures gas flow in pipes or ducts ranging from ½ in (1.27 cm) tubing to flue stacks greater than 25 ft (7.6 m) in diameter with appropriate transducers. Innovative configurations for installation of its ultrasonic transducers meet pipe or duct size and other application-oriented requirements. This obstructionless meter has very wide rangeability, causes no pressure drop, and requires no regular maintenance. Analog and digital outputs in velocity and actual volumetric flow rate are standard.

  • General-purpose gas flowmeter
  • Velocity range: 0.1 to 150 ft/s (0.03 to 46 m/s)
  • Obstructionless; no pressure drop
  • No moving parts; maintenance-free
  • Tolerates dirty flow streams

 

Panametrics Sentinel™ ultrasonic flowmeter

The GE Industrial Sensing Sentinel™ ultrasonic flowmeter is specially designed for high accuracy gas flow measurement. Sentinel is designed for natural gas applications such as custody transfer, transmission and distribution, pipeline balancing, compressor station metering or any gas application where high accuracy is required.

  • Compliant to AGA9
  • High accuracy flow measurement in gases
  • No moving parts
  • Simple installation
  • Suitable for a wide range of pressures and temperatures
  • 50:1 turndown
  • Optional retractable transducers

Panametrics’ PanaFlowTM Meter System

Panametrics’ PanaFlowTM Meter System wetted ultrasonic flowmeter product for liquids, gases or steam that uses standardized flowmeter body designs with options for one or two-path ultrasonic transducers, and local or remote flowmeter electronics. The PanaFlow Meter System is designed for applications such as natural gas, fuel gas, hydrocarbon liquids or gases, solvents, weak acids, water, and saturated or superheated steam.

  • High performance, low cost
  • Complete ‘Plug-and-Play’ system
  • Optional integral explosionproof / flameproof electronics, pre-wired to transducers
  • Bidirectional
  • No pressure drop
  • Suitable for a wide range of temperatures and pressures
  • 2 to 24 inch pipe size capability
  • Simple installation
  • Liquids, gases, or steam