[bottom of graphic]

Pressure – Portables

Druck’s DPI610E Pressure calibrator

The iconic Druck is back! The latest addition to the DPI600 Series is available now

DPI610E Product features

Highly accurate and highly reliable

The DPI610E not only delivers highly accurate measurements – it does so for a wide variety of pressure ranges (350mbar / 5 psi / 33 kPa to 1000bar /15000 psi / 100 MPa ). That means one device can cover all your calibration needs – reducing both cost of ownership and maintenance.

Easy to use – any time, anywhere

From its intuitive interface to its ergonomic design, the DPI610E delivers an optimal user experience. Physical buttons and a touchscreen mean you can use it with or without gloves. An integrated handle and strap make it easier to carry whether you’re on the ground or at heights. And with a built-in hand pump that makes generating pressure effortless, your workday is a lot more productive.

Made to last

Whether you’re working in a temperature-controlled plant or on a windy oil rig, the DPI 610E and its rugged casing is made to last in the harshest of environments. Its battery lasts more than 24 hours, so you can tackle a shift without having to recharge and its hazardous areas approvals provide you with peace of mind to get the job done safely.


Built on a legacy of excellence

When Druck launched the DPI610 series pressure calibrator back in 1997, it was an instant hit. The flagship model of the company’s calibrators included seven commercial versions and four intrinsically safe versions. Today, the DPI610E is the latest evolution of the device that was an industry favourite.

The DPI610E has been designed using the latest advances in pressure measurement technologies, combined with a range of much loved features from the legacy DPI601/605/610/615 units.

Our latest portable is a battery-powered, self-contained manual pressure calibrator capable of pressure generation, fine control, and loop measurement. Most importantly, it has been designed for instrument technicians using input from those working in the field, using input from pressure calibrator users indicated that performance was vital.

The DPI610E retains the iconic handle, the ease of use, and the robust, reliable design of its predecessors, but offers exciting new functionality including an internal barometer, with a barometer port for easy calibration. In addition to this, the DPI610E contains an enhanced battery, offering over 60 hours continual use from a single, 2 hour charge.

DPI610E is an industry workhorse for the test and calibration of pressure instrumentation including transmitters, transducers, gauges, switches and valve positioners. Its high accuracy, dependable pressure generation and rugged construction make it the ideal pressure calibrator for use in harsh process and manufacturing environments.

DPI610E Can be used for:

  • Pressure transmitter calibration
  • Pressure switch test
  • Pressure leak test
  • mA loop test

The DPI 612 Flex

The DPI612 Flex Series of Pressure Calibrators are the next generation of Druck calibrators that combine pressure generation, signal measurement and loop power in single instrument.  Like the DPI 611, they are robust and easy to use but with the additional functionality of interchangeable pressure modules that allow simple in the field re-ranging.  They provide all the convenience of the Druck DPI 610/615 series with significantly improved generation capabilities, higher accuracy and simplified touch screen operation.


Features and Benefits
  • Re-range for different applications with 31 interchangeable pressure modules that also fit DPI 620 Series
  • All inclusive Accuracy to 0.005% FS, 2x Better than other brands
  • Three models available:
    – DPI 612 pFlex: 95% vacuum to 20bar/300 psi
    – DPI 612 pFlexPro: 95% vacuum to 100 bar/1500 psi
    – DPI 612 hFlexPro: 0 to 1000 bar/15000 psi:
  • No in-the-field leaks with Quick-to-fit pressure adapters and hoses
  • Simple, easy-to-use touch screen operation
  • Hydraulic or Pneumatic Pressure versions
  • All versions interfaces with Intecal v10 Calibration Management Software

DPI 612 is an industry workhorse for the test and calibration of pressure instrumentation including transmitters, transducers, gauges, switches and valve positioners. Its high accuracy, dependable pressure generation and rugged construction make it the ideal pressure calibrator for use in harsh process and manufacturing environments.

DPI 612 Can be used for:

  • Pressure transmitter calibration
  • Pressure switch test
  • Pressure leak test
  • mA loop test

DPI612

DPI 611 Portable Calibrator

The new workhorse in pressure calibration

The Druck DPI 600 series has been the industry workhorse for 30 years and today the DPI 610 is simply referred to as the “Druck”

The Druck DPI 611 builds on this legacy of dependable and rugged calibrators to provide twice the performance in a product half the size

Modularity brings a whole new perspective to multi-function test instruments and calibrators.


Quick and simple pressure generation

0 to 20 in 30 seconds

  • Generates from 95% vacuum to 20 bar/300 psi pneumatic pressure
  • Built-in volume adjuster for fine adjustment
  • Precision vent valve for falling calibration points
  • Built-in overpressure protection

Generate 20 bar in your hand

  • Improved performance allows you to generate 20 bar/300psi while holding the instrument in one hand
  • It takes just 30 seconds to generate maximum pressure, even with a hose connecting the device

Quick-to-fit pressure adaptor system

Significantly reduce your set-up time

The DPI 611 comes with a quick-to-fit, leak-free adaptor system because making pressure connections in the field can be very frustrating

  • No tools or sealing required and connections are leak free
  • Damaged adaptors are very simply replaced and there’s no repair downtime

Simple to use touch screen

As easy as 1, 2, 3

  • The DASHBOARD allows quick application selection
  • The TASK menu provides a library of popular configurations
  • The FAVOURITES menu gives even quicker access to regularly used and customised TASKS
  • The touch screen is quicker and simpler to use than complex keypads and special function keys
  • Application connection diagrams can be viewed on screen

Full documenting capability

Indicates PASS/FAIL errors, documents your results, connects with calibration software

The DPI 611 is a simple to use “everyday” tool for maintaining and calibrating your pressure instruments.

  • Automates calibration procedures
  • Reports PASS/FAIL errors
  • Logs data from multiple channels
  • Connects with leading calibration and maintenance software including 4Sight from GE

DPI 611 is an industry workhorse for the test and calibration of pressure instrumentation including transmitters, transducers, gauges, switches and valve positioners. Its high accuracy, dependable pressure generation and rugged construction make it the ideal pressure calibrator for use in harsh process and manufacturing environments.

DPI 611 Can be used for:

  • Pressure transmitter calibration
  • Pressure switch test
  • Pressure leak test
  • mA loop test

DPI 610/615 Series - Portable Pressure Calibrators

DPI620 Genii Advanced Modular Calibration System

Modularity brings a whole new perspective to multi-function test instruments and calibrators.

The Advanced Modular Calibration System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments.

At the heart of this system is the DPI 620, an ultra-compact electrical, temperature and frequency calibrator, which provides simultaneous measurement and source capabilities. It integrates with pressure modules and pressure generation stations to form uniquely capable pressure test and calibration systems.

Its basic component is an ultra-compact, electrical, frequency and temperature calibrator, which provides simultaneous measurement and source capabilities.

Pressure measurement is provided by interchangeable pressure modules that can be attached to the calibrator by a pressure module carrier.

If pressure generation is required the calibrator and pressure module can be attached to one of three pressure generation stations, to form a fully-integrated pressure calibrator, of unparalleled performance.


4Sight2 from Druck –  Calibration Software
Calibration Management Software
4Sight2 from Druck, a Baker Hughes business, offers easy-to-use, cost effective and scalable calibration management  that is equally effective for single use or global multi-site operations. This configurable software is designed to empower your organization to operate simply and securely, connecting your people to instruments, data and enhanced analytics.

Purpose-built with available custom installation support, 4Sight2 is designed to deliver actionable intelligence and transformative insights. Developed in-house, the custom software package enhances the visibility of your assets and data, helping you plan your resources to support effective maintenance, process efficiency and regulatory compliance.