Rangeable/Smart HART Pressure Transmitters - RTX 1000 Series
Since 1972, Druck products have successfully applied technological innovation and application focus to a diverse and demanding world of pressure. Now part of GE Industrial Systems' Measurement & Sensing Technologies business, GE Druck manufactures a comprehensive range of pressure sensors and related test/calibration instruments for the field, workshop and laboratory.
Smart/HART® Differential Pressure Transmitter - STX 2100 Series
The STX 2100 Series Differential Pressure Transmitter complements the STX 2000 Series, providing a complete family of Smart gauge, absolute and differential units. Featuring a unique floating sensor design and state-of-the-art electronics incorporating the HART® protocol, the STX 2100 Series provides enhanced performance and digital two-way communication.
RTX 1930 Series Remote Rangeable Level Sensor
The RTX 1930 Series, through the use of digital correction techniques and a serial configuration interface, offers a 4-20mA sensor with unparalleled accuracy, flexibility and reliability to the customer. The fully welded construction of the RTX 1930 sensor, which contains no O-rings and incorporates all the enhanced features of a GE Druck family of level sensors developed over 25 years of application use, provides an ideal long-term solution for a reliable, accurate and economical level measurement.
Low Pressure Transmitters - LP 1000 Series
The LP 1000 series of low differential/gauge pressure sensors is specifically designed for use in cleanroom, HVAC control and similar applications where the accurate and reliable monitoring of very low pressures is required. This includes wet/wet applications where the sensor may be exposed to aggressive and conductive fluids.
Low Differential Pressure Transmitters (current) - LPX 5000 Series
This rugged design ensures high performance with long term reliability and stability. Excellent thermal and long term stability characteristics make the LPX/LPM 5000 Series ideally suited to a wide range of precision applications from clean room monitoring to low level measurement, air flow in chimneys and many other low pressure measurements.
Low Differential Pressure Transmitters (current) - LPX 8000 Series
Excellent thermal and long term stability characteristics make the LPX/LPM 8000 Series ideally suited to a wide range of high precision applications, from level measurement in pressurized tanks to filter clogging and many other measurements where fast response coupled with excellent overpressure capability are required.
Low Differential Pressure Transmitters (current) - LPX 9000 Series Excellent thermal and long term stability characteristics make the LPX/LPM 9000 Series ideally suited to a wide range of high precision applications, from leak detection to motor test benches, low flow measurement, and many other critical pressure measurements.
PTX 120/WL Wet/wet differential pressure transmitter
The PTX 120/WL is a "wet/wet" differential pressure transmitter accepting a wide variety of pressure media on each port. The positive (high pressure) port is a fully welded 316 stainless steel assembly, the negative (low pressure) port contains stainless steel, silicon, glass, epoxy, aluminum and a silicon 'o' ring seal.
PTX1200 Industrial pressure transmitter
The PTX/PMP 1200 Series is a complete range of pressure transmitters designed to optimize the relationship between price and performance while providing flexibility from a standard production device.
PTX 1230 Submersible pressure transmitter
The 1230 Series submersible/depth pressure transducers are specifically designed for depth/level measurements in the groundwater, well water, canals, rivers, and other similar applications. The titanium construction assures excellent life in the most hostile environments, including corrosive and hazardous chmical applications.
PTX1240 Industrial pressure transmitter
The PTX 1240 industrial pressure transmitter has been designed for use with aggressive pressure media found in many industrial and process applications.The fully welded 316L stainless steel pressure module ensures excelent media compatibility without compromising performance of Druck's micromachined silicon pressure sensing element.
PTX 1290 Lift station submersible pressure transducer
The 1290 Series pressure transmitter is similar to Druck's field proven submersible sensors with the exception of the pressure port. It is equipped with a flush teflon-coated elastomeric diaphragm that reduces the likelihood of grease or biosolids buildup. The pressure transfer medium is a silicone grease that maintains its elasticity between -40 and +250°F.
PMP/PTX 1400 Industrial Pressure Sensors
The PTX/PMP 1400 Series of Industrial Pressure sensors have been designed for use with aggressive pressure media found in many industrial and process applications.The stainless steel isolation diaphragm and fully welded stainless steel pressure module ensures excellent media compatibility without compromising the performance from Druck's own micro-machined silicon pressure diaphragm.
PTX1835/1235 Depth/Level Pressure Transmitter with Internal Lightning Protection
The PTX 1835 and 1235 submersible depth/level pressure transmitters are specifically designed for depth/level measurements in groundwater, well water, canals, rivers and other similar applications where the possibility exists for lightning damage. These devices have the same high performance and excellent reliability as the PTX 1830 and 1230 with the additional benefit of internal lightning protection.
PTX1885/1285 Depth/Level Pressure Transmitter with Internal Lightning Protection
The PTX 1885 and 1285 Series submersible depth/level pressure transmitters are specifically designed for depth/level measurements in groundwater remediation, chemical tanks and other similar applications where the possibility exists for lightning damage. These devices have the same high performance and excellent reliability as the PTX 1880 and 1280 with the additional benefit of internal lightning protection.
Subsea Pressure Transmitters - PTX 300 Series
The PTX 300 series of pressure transmitters has been developed for the offshore oil and gas industries as a compact, high performance device for reliable and long term subsea use. Maintenance free, it is available with operating ranges up to 15,000 psi and is fully submersible with an ambient pressure rating up to 4000 psi.
PTX/PMP 3000 Series Amplified Output Aerospace Pressure Transducer
The PTX/PMP 3000 Series of high level output pressure transducers use proven technology within flight certified hardware. Fully qualified to DO-160D, the modular construction of hte 3000 Series allows a wide selection of pressure ports, electrical connectors, and circuit options without the need to requalify.
Wellhead Pressure/Temperature Transmitters - PTX 400 Series
The PTX 400 series of pressure, temperature and combined pressure/temperature transmitters has been specifically designed for long term use in subsea locations. It enables accurate process measurements to be made directly on subsea wellheads and production manifolds. The sensor design is based on API performance requirement PRI and product specification level PSL3.
PTX 510 Industrial pressure transmitters
The PTX 510 combines micro machined silicon diaphragms with fully welded stainless steel and Hastelloy pressure ports to provide a highly accurate, stable pressure transmitter with the materials and environmental protection required for industrial applications.
PTX 600 Series Precision pressure transmitters
For critical applications in industrial and research environments the PTX 600 series of two wire, 4-20mA output pressure transmitters improves upon the performance of previous models by offering new levels of stability, versatility and measurement accuracy from a standard production device.
PTX 651/PTX 671 Offshore/process pressure transmitters
Incorporating technology developed for aerospace/ military applications gives improved output noise, non-linearity and hysteresis, and long term stability. Process connections have been standardized as 1/2 NPT with a choice of electrical connections, either 3/4 NPT female conduit or junction box.
Hammer Union Pressure Transmitter - PTX 661 Series
The PTX 661 Hammer Union Pressure Transmitter has been designed for use in extremely harsh environments in both on-shore Oil Drilling operations where high shock and vibration is likely to be encountered. The transmitter is available in both the 1502 and 2202 WECO® Wing Union configurations, both of which are NACE sour gas compatible.(WECO® is a registered trademark of FMC Technologies.)
PTX7200 Industrial Pressure Transmitter
The PTX 7200 Series combines modular design with the latest advances in ASIC technology and surface mount electronics. This provides a lightweight, highly reliable and cost-effective solution for a range of industrial pressure measurement applications including factory automation, test cell monitoring, equipment monitoring and control, gas turbines, and any other application where high-reliability is important. The rugged design with exceptional RFI/EMI immunity gives the PTX 7200 the lowest cost-of-ownership in the industry.
Industrial Pressure Transmitters - PTX 7500 Series
The PTX 7500 series combines modular design with the latest advances in ASIC technology and surface mounted electronics. This provides a lightweight and cost effective solution for a range of industrial pressure measurement applications.
PTX 7800 Pressure Transmitters
The PTX 7800 series combines modular design with the latest advances in ASIC technology and surface mounted electronics. This provides a lightweight and cost effective alternative to pressure gauges and switches in process industry applications.
PTX 7900 Series Pressure Transmitters
The PTX 7900 series combines modular design with the latest advances in ASIC technology and surface mounted electronics. This provides a lightweight and cost effective alternative to pressure gauges and switches in process industry applications.
