Low Cost OEM/Industrial Transducers - 1000 Series
This flexible product is aimed at OEM manufacturers who require a high quality, cost effective pressure sensor, designed to meet their own specific application requirements at an economical cost. It is manufactured in high volumes using a standard "core" principle which readily enables variation of the final product configuration.
1500 Series Low Cost Industrial Pressure Sensors
This low cost sensor package is aimed at OEM manufacturers and end users who require a high quality, cost effective pressure sensor, for high volume pressure measurement applications. The 1500 series is manufactured using a low cost piezo-resistive silicon sensor with a choice of two basic mechanical user configurations (cable or DIN plug) and two electrical formats:- 3 wire voltage VT series or 2 wire 4-20mA XT series
DPS 4000 CANbus Digital Output Pressure Transducers
The DPS 4000 Series is a state of the art range of digital output pressure transducers. Fully temperature corrected pressure readings are output as a digital word in any one of 24 engineering units, requiring no user system set-up or calibration. The integral digital electronics enhance performance to levels unmatched by traditional analog transducers.
LPM/LPX 1000 Series Ultra Low Differential Pressure Transmitter
The LP 1000 Series wet/wet differential pressure transmitter is ideally suited for use in clean room HVAC monitoring and control. The device offers several improvements over traditional sensors such as user accessible damping, excellent long term stability, and wet/wet differential operation where conductive fluids may be exposed to the measurement diaphragms. For applications where the pressure transmitter will be installed within one of the pressure zones, the LPM/LPX 1000 is available in a wet/wet gauge pressure configuration where the second pressure port is eliminated, venting the sensor directly to the atmosphere.
LPM 5000 Series Low differential pressure sensor (voltage)
This rugged design ensures high performance with long term reliability and stability. Excellent thermal and long term stability characteristics make the LPX/LPM 5000 Series ideally suited to a wide range of precision applications from clean room monitoring to low level measurement, air flow in chimneys and many other low pressure measurements.
LPM 8000 Series Low differential pressure sensor (voltage)
Excellent thermal and long term stability characteristics make the LPX/LPM 8000 Series ideally suited to a wide range of high precision applications, from level measurement in pressurized tanks to filter clogging and many other measurements where fast response coupled with excellent overpressure capability are required.
LPM 9000 Series Low differential pressure sensor (voltage)
Excellent thermal and long term stability characteristics make the LPX/LPM 9000 Series ideally suited to a wide range of high precision applications, from leak detection to motor test benches, low flow measurement, and many other critical pressure measurements.
High Performance Level Pressure Sensor
The PDCR 1830/1840 transducer (mV output) and PTX 1830/1840 transmitter (4-20 mA output) are the latest generation of fully submersible high performance sensors for measurement of hydrostatic liquid levels.
Amplified Isolated Output Transducers - PDCR 130 Series
The PDCR 130 series is a complete range of high level output pressure transducers, featuring the very latest in silicon strain gauge diaphragm, electronic thermal compensation and linearization technology. This is ideal for flight test applications.
Submersible Level Pressure Sensors - 1730/1740 Series
The 1730/1740 series has been developed as a general purpose, hydrostatic liquid level sensor, designed to work in low powered, arduous applications, including surface water, ground water and tank level.
Differential Pressure Transducers - PDCR 2100 Series
The PDCR 2100 is a small, lightweight true wet/wet dual diaphragm differential pressure transducer with standard ranges from 0 to 5 psid through 0 to 900 psid. The transducer is compatible with a wide range of fluids and gases. It combines high accuracy with good static pressure characteristics, and is available with a variety of pressure connections and electrical terminations.
PDCR 2200 Series - 350 Ohm Bridge Pressure Transducer
The PDCR 2200 Series has been developed to give a modern state of the art replacement for the metal foil, 350 ohm bridge transducers. These transducers utilize "heavy doped" silicon technology which brings together the advantages of silicon micromachined diaphragms and the low thermal effects achievable by predominantly resistive bridge technology.
Aerospace Pressure Transducer - PDCR 330 Series
The PDCR 330 pressure transducer is the culmination of over 10 years of development by Druck engineers. It is currently being used on major aerospace projects and is equally suitable for flight test programs and test bed measurements, being capable of measuring pressures from 5 psi to 10,000 psi gauge, sealed gauge and absolute.
PDCR 3500 Digital & Analog Output Sensor
The PDCR 3500 offers a unique capability of digitally enhanced, high accuracy output, coupled with high analog bandwidth. The transducer is a 1 inch diameter fluid isolated analog output device similar to the PMP 4000 Series. It achieves a total accuracy performance of up to ±0.1% FS over -65° to 250°F with the support from internal digital electronics which correct for the repeatable errors without affecting the analog bandwidth.
High Performance Millivolt Output Transducers - PDCR 4000
The Druck PDCR 4000 Series, a range of high performance millivolt output pressure transducers, is a continuation of a successful family of products started in the early 1970's. This new generation of transducers offers enhanced levels of measurement accuracy, stability and reliability with a flexible specification to meet the varied and demanding needs of today's industrial and OEM users.
Miniature Pressure Transducers PDCR 41, 81, 200
A range of high accuracy sensors complete with thermal compensation in a miniature package providing maximum performance with minimal size and weight. High signal outputs, excellent linearity, negligible hysteresis and good repeatability performance with long term stability are the benefits of using Druck miniature pressure transducers.
General Purpose Pressure Transducer - PDCR 800 Series
Every PDCR 800 transducer is based on a high performance pressure sensor (core) which has subsequently been completed for a specific application by the addition of an electron beam welded pressure connector and an electrical connector assembly. The core is an accurate pressure transducer incorporating a high integrity silicon diaphragm and titanium module, a pcb assembly and advanced compensation techniques which give excellent performance over extended temperature ranges. Following automatic calibration over the whole temperature range and to three times the nominal pressure range all the data is stored in the computer data base.
Wide Temperature Range Transducers - PDCR 9x2
This is a compact 19" rack mount unit for o or workshop use. It is ideal for integration with ATE systems, or simply for use as a convenient bench top tool. Pneumatic connections are available either on the front or rear panel to suit specific applications.
Automotive Pressure Transducers - PDCR/PMP 4300 Series
The PDCR/PMP 4300 is the latest in the range of products that for many years has been "fine tuned" in design to suit all chassis and engine pressure measurement requirements.
PMP 1200 Industrial amplified pressure transducer
The PMP 1200 Series is a complete range of pressure transmitters designed to optimize the relationship between price and performance while providing flexibility from a standard production device.
Industrial pressure transmitter
The PMP 1240 industrial pressure transmitter has been designed for use with aggressive pressure media found in many industrial and process applications.
PTX 1290 Lift station submersible pressure transducer
The 1290 Series pressure transmitter is similar to Druck's field proven submersible sensors with the exception of the pressure port. It is equipped with a flush teflon-coated elastomeric diaphragm that reduces the likelihood of grease or biosolids buildup. The pressure transfer medium is a silicone grease that maintains its elasticity between -40 and +250°F.
Industrial Pressure Transducers DIN Plug - PMP 1400
The PTX/PMP 1400 Series of Industrial Pressure sensors have been designed for use with aggressive pressure media found in many industrial and process applications.
PTX/PMP 3000 Series Amplified Output Aerospace Pressure Transducer
The PTX/PMP 3000 Series of high level output pressure transducers use proven technology within flight certified hardware.
PMP 317 Automotive pressure sensor
The PMP 317 series has been designed to withstand the extreme temperature, vibration and shock levels of automotive test applications. A micromachined silicon sensing element is mounted within a high integrity pressure module constructed from stainless steel 316L and Hastelloy C276. This provides hostile media compatibility, high overpressure and burst ratings.
Amplified Output Pressure Transducers - PMP 4000
The Druck PMP 4000 Series, a range of high performance amplified output pressure transducers, is a continuation of a successful family of products started in the early 1970's.
PTX 1280/1880 Harsh environment submersible pressure transducer
The 1280 Series submersible/depth pressure transducers are specifically designed for depth/level measurements in the groundwater, well water, canals, rivers, and other similar applications. The titanium construction assures excellent life in the most hostile environments, including corrosive and hazardous chmical applications. Druck backs its titanium construction with a 5 year corrosion warranty. Standard vented cable is tefzel. Polyurethane cable is available on the 1230 Series.
Barometric Pressure Transducers - RPT 410
The RPT 410 Resonant Silicon Pressure Transducer (RPT) utilizes Druck's resonant silicon technology that has been field proven in many applications in air data flight and test, precision portable and bench calibrators, and high performance wind tunnels.
RPT Series Resonant pressure transducer
The use of resonant structures in pressure transducers has long been recognized as producing highly stable sensors. GE Infrastructure Sensing has developed this technology to produce a series of Resonant Pressure Transducers (RPT) using silicon to give high accuracy and stability with low manufacturing costs.
